Pressure Plus TEST
$66.94
1-step beautiful natural wood tone for all kinds of pressure treated lumber.
Available in natural and weathered wood tones. Engineered to improve the dimensional stability and overall performance of pressure treated wood.
Horizontal and vertical wood surfaces | Decks, balconies and fences | New and old pressure treated wood
Available in 1 US gallon containers.
Out of stock
Description
- Transforms green pressure treated lumber to a beautiful natural wood or weathered gray tone
- Enhances the natural tone of brown pressure treated lumber or transforms it to a beautiful weathered gray tone
- Enhances gray toned pressure treated lumber
- Easy 1-step application
- VOC compliant, environmentally friendly
- Translucent
- Ideal for both new and existing pressure treated wood surfaces
- Penetrating protection
- Reduces water absorption
- Reduces swelling of wood
- Water repellent, breathable
- UV resistant
- Ready to use
- Clean up with soap and water
Appearance – Regular, Light or Gray
Coloring – Transparent
Form – Liquid
pH, (approx.) -9-9.5
Viscosity – 15-18 seconds Z #2
Solvents – None
Freezing Point – -1ºC (31ºF)
Dilutent – Water
Cleanup – Water
Drying Time @ 20ºC (68ºF) 18% M.C – 24 Hours
Drying Time between applications @20ºC (68ºF) – 12-24 Hours
Coverage Pending to Penetration – 250-350 sq ft/ US Gal
VOC (g/L) – Actual 48/Regulatory 212
Appearance
Regular, Light or Gray
Coloring
Transparent
Form
Liquid
pH, (approx.)
9-9.5
Viscosity
15-18 seconds Z #2
Solvents
None
Freezing Point
-1ºC (31ºF)
Dilutent
Water
Cleanup
Water
Drying Time @ 20ºC (68ºF) 18% M.C
24 Hours
Drying Time between applications @20ºC (68ºF)
12-24 Hours
Coverage Pending to Penetration
250-350 sq ft/ US Gal
VOC (g/L)
Actual 48/Regulatory 212
*More detail available in the Product Data Sheet
PREPARATION IS KEY TO A SUCCESSFUL PROJECT
- Inspect wood surfaces for defects and make any necessary repairs.
- Use the appropriate Sansin wood cleaner and/or wash the entire surface with a minimum 3000 PSI pressure washer using clean water and proper technique. Be careful not to erode the surface.
- For best results and a smooth level surface, sand the surface area well with a 60-80 grit paper using a random orbital sander.
- Follow by power washing, vacuuming or using compressed air for proper cleaning. Surface must be clean, free from dust, dirt, grease, wax or any existing coatings.
APPLICATION METHODS
- Always flood surface to the penetrating point of saturation.
- Dipping.
- Brushing.
- Flood coating.
- Spraying – hand or automated spraying (low pressure or airless).
WORKING PROCEDURE
- Stir well before and during the application process.
- Test formula on an inconspicuous wood surface to ensure proper color and penetration.
- Apply in proper conditions with an ideal temperature of 21°C (70°F) and relative humidity of approximately 50%.
- Do not apply if rain or near freezing temperatures are expected.
- Saturate the wood surface (5-6 wet mils).
- Do not apply on wood that is warm to touch.
- Continually check the surface; brush out all puddles and runs.
- Always read published directions for use prior to beginning any project.
MAINTENANCE
Horizontal surfaces require maintenance every 2-4 years. Maintenance is necessary when the surface shows signs of wear, such as fading or heavy moisture absorption. Maintaining your wood on a regular basis will ensure long-lasting color retention, exceptional dimensional stabilization and effective water repellency. Periodically, clean the wood surface with a power washer or Sansin Multi-Wash to remove dirt and residue. How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and exposure levels. If fading or erosion is evident, prepare wood by using a power washer to lightly clean the wood surface; or use Sansin Multi-Wash. Then re-apply one maintenance coat of Pressure Plus according to instructions. Exposure, workmanship and color will affect the performance of the coating.
STORAGE
Shelf Life when stored in ideal conditions is 18 months. Store at a temperature of between + 10ºC and + 30ºC (50ºF and 86ºF). Keep containers tightly closed.